 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I'm having problems with my Bryant gas furnace model no.230-5wg
It will heat but when it reachs it's desired temperature,it starts cutting off and on and you can hear the burners kicking on and off.Then after it runs for awhile you can hear a buzzing noice inside of a little box with a switch runnning to another larger box.
|
||||
Check out some similar questions!
Hi, I have a Bryant model#310AAV042090ACJA Gas furnace. The system just won't turn on. I checked and the LED light is completely off. Turned power off to system, gas off, waited couple minutes, turned back on; nothing - won't turn back on. Strange thing is that at night it did not work, then in...
I hear water flowing from the "pump" outside the furnace, that has a tubing connected to a train tube by the sink nearby. I looked inside the bos ("pump"), there is some solution (like antifreezer) inside, but vary shallow. What should I do to silent this pump, or to fix this problem?
I have a 10 year old Bryant gas furnace model 383 KAV that sometimes does not run. The inducer motor does not come on and there are no codes. If I cycle the power several times it will eventually all work normally at least until the next morning when it may or may not restart after being off at...
I've got a Bryant upflow gas furnace Model #383KAV that quit working last night. I just put a new blower motor inducer motor and a ignighter in and it was working fine. Now when I try to light it all that happens is the blower motor comes on for about 1 minute then it just stops. Normally the...
Hi My furnace stopped working this morning. It's 8 degrees here in Michigan... brrrrr. :( I checked for an error code but the LED light was on continuous. The problem was that the furnace was on (flames going) but the fan would only stay on for about 2 minutes and then turn off. I had...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
