 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Whirlpool senseon dryer control panel will not light up, the dryer will not start
My whirlpool cabrio dryer will not start. The 'mode indicator' stays on sensing.
My 29in Whirlpool dryer will stop in the middle of the cycle. It won't work again until I pull on the control panel then it may or may not stay on. I thought maybe some wires were loose so I pulled the control panel and moved wires around but it didn't seem to help. I reattached the panel and...
My sensing light is on and my dryer won't reset. What is wrong?
Whirlpool gas dryer starts, the igniter glows, gas is ignited and then the flame goes out and stays off. Vents are not blocked, the flame sensor is new, the thermal fuse is new. The igniter glows through flame ignition and then shuts down (not sure it this is normal) and I'm not sure if the gas...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
