Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Taking acoustic measurements of a room for filter design.
[ 0 Answers ]
Hello there. I'm an electrical engineering major and I have a question regarding a project I'm working on. I'm supposed to design 3 band-reject filters on matlab for echo cancellation/suppression then implement it on FPGA. My problem is not with filter designing but with taking acoustic...
How do I locate plumbers who work in very small crawl spaces?
[ 3 Answers ]
Are there plumbers who are willing to replace galvanized drain pipes in crawl spaces that are barely accessible ? And if so how much per hour?
I would like to design control room
[ 0 Answers ]
Parameter Controlled 1.Humidity = 50% 2.Temp = 25+/-2 deg.C and I have fume hood 1 unit(flow rate= 4000CFM) and I would like to use Fresh Air Unit. How calculate to select FAU. Thank You,
How to design a Genset room?
[ 14 Answers ]
Im in a frustrated need of some information about designing a good genset room. Im buying these 4 unit of 500kva diesel generator with specifications as the followings: A Silent Type engine, 6 Cylinders, bore x stroke of 159x159mm, a dimension of 5(L)x1.8(W)x2.1m(H) while each of the engine...
How do you alphabetize exact names with spaces and without spaces
[ 1 Answers ]
What would you put first. Van De Vanter or Vandevanter. View more questions Search
|