Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I replaced my moen 1225 cartridge and now I get no water
[ 1 Answers ]
I replaced my Moen faucet cartridge (kitchen w/ a 1225 replacement cartridge) and now instead of just no hot water I get no water at all I went back and did everything again following the video instructions from Moen and still no water HELP.
Getting my replacement Moen 1225 cartridge to work correctly
[ 4 Answers ]
I just replaced my Moen 1225 cartridge in a bathroom faucet and followed the instructions. Once it was installed, the stem and the handle would not stop rotating - spinning freely with no "off" stopping. It seems the entire cartridge turns when the stem and handle are re-installed. Does anyone...
After replacing Moen cartridge, still little water pressure, how can I fix?
[ 13 Answers ]
After some hot water heater problems, I got no water pressure in the tub/shower. I replaced the cartridge (one an knock off that slides real easy and when that did not work I used a 'genuine Moen replacement part') Both to no avail. I still get very little water pressure. I called Moen and they...
Just installed a new moen positemp mixer and my water pressure is little to non
[ 5 Answers ]
Just installed a new moen positemp mixer and my water pressure is little to non,I am only using cold water as I have no hot water installed yet. When I pull the cartridge out water gushes out the brass fixture, I insert the cartridge again and water pressure disappears.
Moen posi-temp no water pressure
[ 0 Answers ]
My Moen posi-temp cartridge was faulty so I replaced it. When I reassembled it, I could not get the clip back in, so I went back to the store and got it replaced. I still had the same problem. The original was 10 years old, so I figured it had changed slightly so I dremeled a small groove in each... View more questions Search
|