Ask Experts Questions for FREE Help !
Ask
    dcottey's Avatar
    dcottey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 11, 2007, 12:01 PM
    direct3d running problems
    Hello, I have bought flight sim X ( I tested my PC on the Microsoft game check website and it said my PC was adequate!) but the game would not start because of a video card problem, so I update my VIA video card driver to support direct3d. I have done this but if I try to run the game the menu works fine, but when entering gameplay the PC reboots its self.
    In the dxdiag menu when testing the direct3d function it works for 7 interfaces then when going onto 8 interfaces a blank black screen appears and then comes up to the blue error screen with the error, vtdisp- device driver got stuck in an infinate loop.
    I've looked for ages for any hints. Help!!
    Morrowrj's Avatar
    Morrowrj Posts: 345, Reputation: 22
    Full Member
    		  
    #2

    Apr 11, 2007, 02:38 PM
    This has been a problem with VIA and ATI video cards. A quick fix that worked for some can be found here:Infinite Loop Fix! - TechSpot Troubleshooting
    However you may experience reduced performance from you card after trying this. You may be force to replace the card altogether.




    Good Luck,
    Morrowrj
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat problems or furnace problems [ 22 Answers ]

Is it possible that a thermostat operates correct all the time except when it reaches the temperature that is set doesn't maintain that temperature?:D I noticed that actually that thermostat gives a signal to the furnace but furnace doesn't turn on but that happens only when thermostat needs to...

Direct3D does not have enough display memory to perform the operation. [ 1 Answers ]

I tried to run a game on my PC recently, but I got an error message when I tried to run it. The message that came up was the following:Could not create device for Direct3D. Direct3D does not have enough display memory to perform the operation." Is there something I need to download, or do I...

Bath tub shower spout & head running water running at same time [ 1 Answers ]

I started with a slight dripping problem(sayko system).i decided to replace all 3 stem assemblies together as they all were about 18 years old.after reassembling the new stems(danko brand),turned on the water supply & checked faucets.hot & cold worked fine but when the shower was turned on,water...

Am I running? [ 11 Answers ]

Hi all, Some of you might know my story, most probably don't. Anyway I have just broken up with my very beautiful girflriend of 7 years and am coming to grips with facing this big wild world or being a man alone for the first time. Am having a tough time dealing with it but with the advice...

View more questions Search