Ask Experts Questions for FREE Help !
Ask
    dozwerw25's Avatar
    dozwerw25 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 31, 2015, 03:03 PM
    I have bypassed the contact switch on my outside unit
    When I bypass the contact switch on my outside unit the unit comes on. Why will it not work without being bypassed. Also the unit stays on because of the bypass unless I turn off the disconnect on the wall by outside unit.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Jul 31, 2015, 05:01 PM
    By your description I would think that the contact switch is bad. Have you tested it to see if it makes and breaks contact.

    I would replace the switch

    Chuck
    skipper1080's Avatar
    skipper1080 Posts: 7, Reputation: 1
    New Member
    		  
    #3

    Aug 4, 2015, 12:24 PM
    What switch are you bypassing? The outside contactor requires 24 volts to the contactor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to wire a 230 volt 10 amp pump to a 110 volt float switch with a contact switch [ 1 Answers ]

How to wire a 230 volt 10 amp pump to a 110 volt float switch with a contact switch.

Whirlpool Washer won't spin or drain. Lid switch bypassed [ 1 Answers ]

Whirlpool washer Model # LSB6200KQ1 won't spin or drain. I bypassed lid switch several months ago. When it hits spin cycle, just nothing no noise, or smell.

Air unit contact [ 1 Answers ]

Is the contact where the power goes from the unit to the power box or is a contact inside the uunit central outside with fan it started this after my grass was mowed fan will not quit running when on it startes running as soon as I plug it in to the power box.when it is on the air inside cools,but...

Outside unit contact [ 1 Answers ]

Where is the contact located in the outside unit?

View more questions Search