Ask Experts Questions for FREE Help !
Ask
    bilmar's Avatar
    bilmar Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 24, 2015, 11:35 AM
    Start/resume light stays on
    The start/resume led light stays on all the time. When the heated/dry option is selected the led light does not come on. The dishes do not seem to be drying as they should.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jun 24, 2015, 10:11 PM
    There is no way to tell you what to do without knowing what type of machine you have. Some have had problems with the electronic control board's capacitors being bad.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Security light stays on on my car and the car won't start [ 2 Answers ]

This morning I took my son up to the top of the drive way and my car was doing fine. I had turned the car off once he got on the bus I went to start my 93 Pontiac Bonneville and it didn't start and the security light is staying on. I'm not sure if I need to replace a main fuse under the hood or if...

Light switch issue, Light stays on! [ 8 Answers ]

Im having a problem with a light switch... the light stays on regardless of the position of the switch. I have swaped the switch out with a new one and still have the same problem. The switch controls to recessed lights over a fireplace. In the box on the wall there are several wires: 2 white...

The pilot light stays light until I turn the thermostat up. [ 0 Answers ]

I have a miller furnace Model mgc-80. The inducer motor comes on & blows out the pilot light. The gas valve doesn't open. What could be wrong?

"kenmore elite dishwasher with blinking start/resume light" [ 0 Answers ]

This is not the problem of a one time occurrence. I can reset the light simply by opening and closing the door. What this does not do is fix the blinking light problem permanently. It occurrs on different cycles, or different days. No pattern here. I have cleaned the seal and checked to make sure...

Mazda Miata won't start -ABS light stays on [ 4 Answers ]

1994 Mazda miata abs light stays on sometimes. When it does, wipers and AC Won't work. Also, car will not start sometimes. Less than 75,000 miles. I just turned ignition 4 times. Nothing happened. I waited a few seconds and turned ignition and it started fine. I have replaced the start...

View more questions Search