Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bathroom faucet handles
[ 2 Answers ]
Hello all, I have been trying to replace my bathroom faucet handles both cold and hot. After some problem finding the correct handles I got them screwed in and I turned the water on from underneath and it came on fine. However, when I turned the handle to turn the water off the handle turned...
Shutoff valve replacement for bathroom sinks and toilet
[ 10 Answers ]
I am replacing my old shutoff valves under my bathroom sink and toilet. How do you go about getting them off when they are soldered on? I know they need to be sweat off , but not familiar with the technique. Please help.
Slow draining bath sinks since replacement
[ 5 Answers ]
I recently redid my master bathroom. Since replacing the cultured marble countertop with sinks built in and new faucets the sinks drain slow. If I turn water off and let the water drain out when sink is almost empty there is a big air bubble that comes out of drain and then water drains OK until...
Bathroom sinks from 1 to 2
[ 2 Answers ]
We are in the process of remodeling our bathroom built in 1996 (florida). We have purchased a stand alone vanity with 2 sinks. There is a vertical opening from the top to bottom backside of the vanity in the center of each sink and a square opening at the bottom of each side, directly under each... View more questions Search
|