 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ask an electrical engineer
I'm an engineering student trying to find resources on lasers. I have a project that I have a year to complete and I am going to use a laser to range find for a rover I am going to build. I've thought about tearing apart a handheld range finder and using that but that could take a while to figure out and I'm not sure if that would work. Are there any resources out there that could guide me to build one considering I'm a poor student and electronic components could be a cheaper option?
|
||||
Check out some similar questions!
Im looking to convert 5 volts to 16 volts. But I can't seem to find a transformer that will do it.
I am working with a low voltage lighting system on a model train layout. Output of power source is 14volts (amps unknown). 22gauge copper/silver wire to carry load. Wiring completed in parallel with copper side to carry all positive leads and silver to carry all ground leads. Lighting is a mix of...
Hello! Quick electrical question about voltage drop: From the meter which is directly conneced to the electrical main from the pole, I am running 8/3 OR 6/3 Tray Cable 550 feet to the cabin. The supply through this cable will be 240v.
I am building a 12 micro motor wind generator array. Each motor is rated 0.2 amps at 12 volts. Each produces 12 v dc after connecting them to a rectifier, and they are all connected in parallel. How many amps will they produce altogether?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
