Ask Experts Questions for FREE Help !
Ask
    norbertingram's Avatar
    norbertingram Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 9, 2015, 03:20 AM
    2000 pontiac Montana... first I replaced thermostat and water pump and it still hot
    2000 pontiac Montana... first I fix the heater holes that burst while driving and still overheated so I ran a test to see if the intake gasket had a leak it didn't so replaced thermostat and water pump and vacuum out and it still overheat
    norbertingram's Avatar
    norbertingram Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jun 9, 2015, 03:29 AM
    What is code 405
    2000 pontiac Montana computer test reads code 405
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    Jun 9, 2015, 05:38 AM
    Consider replacing the radiator. Passages may be blocked by phosphate scale and/or corrosion. An IR thermometer will help you locate blockages. You may need to reverse flush the cooling system, including the heater.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #4

    Jun 9, 2015, 07:14 AM
    Quote Originally Posted by norbertingram View Post
    2000 pontiac Montana computer test reads code 405
    If that DTC was a P0405, it's related to the EGR output control and likely has nothing to do with the issue of overheating.
    Don't overlook the importance of the radiator cap itself. If it won't hold the specified pressure, the system will boil at a much lower temperature.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

After replaced water pump and thermostat truck overheats why? [ 4 Answers ]

I already replace the water pump, bypass hose and thermostat but the 2000 mercury mountaineer still is overheating why?

Replaced a hot water tank,water is not going to the pressure tank-the pump stays on [ 2 Answers ]

Replaced a hot water tank, turned the pump on and the water is bypassing the pressure tank. The pressure tank will not fill up and the pump remains on and will not shut off. We do get water though but needs to shut off the pump so it will not burn out. Any thoughts? Thank you Any ideas will...

2000 pontiac Montana overheating after I changed waterpump and thermostat [ 1 Answers ]

2000 pontiac Montana overheating after I changed waterpump and thermostat fan blower still runs it is blowing air but air is cold

.how do I remove the crossover exhaust pipe from pontiac Montana 2000 [ 1 Answers ]

How do I remove the crossover exhaust pipe from pontiac Montana 2000. Im trying to change the thermostat

2000 Pontiac Montana A/C [ 2 Answers ]

I have a 2000 Pontiac Montana, a/c blows cold in front, rear feels like outside air. Where do I need to look first? Thanks

View more questions Search