 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore dishwasher 665.17593201 won't start
I have a Kenmore Elite model 665.17593201.
My first problem was would not start and had a flash quick rinse light flashing. 1. I reset the power no luck 2. I took the control panel apart and tried the fix using air through the holes no luck 3. I replace the circuit card on the control panel No Luck 4. But when repower it ran one cycle 5. Now will not start and I have normal wash light and clean light flashing 6. Have reset the power and check the fuse on the control circuit card |
||||
Check out some similar questions!
Model number 665.15112K212 It won't start. The problem appears top be that it doesn't close right. You have to press hard to close it. It doesn't click as it should. Then it sticks when you try to open it.
I have a Kenmore dishwasher model 665.15772 and it has been working fine. When I went to start it last night I noticed that the normal wash light is on and the no-heat dry and lock lights are alternating being on. It won't start. I looked inside and noticed a napkin (wet) was draped over the...
All the buttons light up on the panel except the "start" when pushed. Do we need a whole new panel?
I have a Kenmore Ultra Wash Dishwasher Model Number 665.17609. Owned since new about 4 years now. It will not start, but the cancel button will begin the drain cycle, even though it is empty, and the Pots and Pans button will light up, as well as the lights for a 2, 4, or 6 hour delay. I tried...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
