Ask Experts Questions for FREE Help !
Ask
    shumwari's Avatar
    shumwari Posts: 1, Reputation: 1
    New Member
     
    #1

    May 31, 2015, 03:08 AM
    Can I rectify 3 phase (415v) to 220v dc
    Can I rectify 3 phase (415v) to 220v dc by individually rectifying the phases in relation to neutral (using 3 single phase rectifiers) then connect the vcc together and the gnd together.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    May 31, 2015, 04:42 AM
    You need a transformer in there as well as some filter capacitors.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can a single phase 440v motor be run from a 3 phase 415v generator? [ 1 Answers ]

The motor uses the same 4 wire plug as a 3 phase system utilizing 2 x 220v actives to get the 440v.

Help wiring 1 phase 220v circuit [ 10 Answers ]

I need to run a 220v circuit for my new band saw. It requires single phase 220v 10 amp. The manual says it draws 10 amps at maximum load but later says minimum circuit size 15amp. Does this mean I should use 15 amp ganged breakers? Can I use normal 20A romex to run this or do I need special...

Got a leeson 2hp 3phase 220v,only have 220 1 phase,can I run this? [ 0 Answers ]

Got a leeson 2hp 3pase 220,only have 220 1 phase service,can I run this?

Can 220v-1 phase table saw be powered from a dryer outlet [ 6 Answers ]

Hi I have a Delta 3 HP -220 volt single phase table saw in my garage but do not have a 220 volt outlet in the garage. I was considering making an extension cord to run from the garage to the nearby laundry room where I could plug into the 220 volt clothes dryer outlet. The dryer has a circuit...

Can I rig 2 generators (220v bi-phase) to get 220v three fase [ 2 Answers ]

I have two 6000 watt generators that are bi-phase and want to run a 5hp motor that is 220v / 3 phase. Is it possible? How would the wiring go? I'm in Mexico and can't find a rental... well I found varios but no one that can hook up my motor.


View more questions Search