Ask Experts Questions for FREE Help !
Ask
    little1jh's Avatar
    little1jh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 28, 2015, 09:03 AM
    Stubborn sink screw cap
    How to unscrew cap to replace washers on delta sink faucet
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    May 28, 2015, 09:06 AM
    Can you post a picture of it ? Or at least tell us what model it is ?

    In the interim: some caps are installed by being screwed in, some are just pushed in.

    Milo
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    May 28, 2015, 06:38 PM
    And a picture could help us too. This might help https://www.youtube.com/watch?v=e8QK1Da0hxA
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove a tight and stubborn oil dipstick cap top [ 1 Answers ]

The yellow plastic oil dipstick cap top on my Briggs and Stratton Bolens 500 push mower is on way too tight. I can't loosen it by either hand or wrench. Short of blasting, what would you recommend?

What is the overflow cap called from a dishwasher on the sink [ 2 Answers ]

What is the part called from the dishwasher that the overflow comes out of on your sink

What is the purpose of the screw on cap on sewer line in basement. [ 6 Answers ]

I know it is to give access to snaking out sewer pipe if there is a clog... but, my question is... does the cap need to be on to keep pressure in the line to prevent clogs? Is there a health hazzard if the cap only sits on the opening? Any info would be great!

How do I cap off the spray hose on my sink? [ 3 Answers ]

I want to cap off the spray hose unit on my kitchen sink but can't find the cap to do it. Is there one?

Removing a stubborn screw. [ 1 Answers ]

Hi: I am trying to remove a face plate for an electrical outlet. However, the central screw on the face plate just turns but does not come out at all! How do I get it out? Thanks, Kutra

View more questions Search