Ask Experts Questions for FREE Help !
Ask
    Knoble's Avatar
    Knoble Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 11, 2015, 05:54 AM
    Kenmore Ultra Wash dishwasher won't run. No lights on the control panel.
    Tried to start a load of dishes in my Kenmore dishwasher, and it won't run. No lights on the control panel. I have flipped the breaker, tried the heated wash/heated dry buttons.
    Any ideas that don't involve replacing the unit would be greatly appreciated as I can't afford a new one.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    May 11, 2015, 10:33 PM
    You could have a blown fuse in the dishwasher. See: https://www.youtube.com/watch?v=L-bMqVb9kX0
    Check YouTube and get a good digital multimeter at Home Depot so you will be able to test parts. You cannot guess on an electrical part (or any part).
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Ultra Wash dishwasher won't start, red control lock light flashing [ 8 Answers ]

Kenmore Ultra Wash dishwasher won't start. The control lock red light (above the "start" pad) flashes when I press "start" or any of the control lights. The door is closed completely.

Kenmore ultra wash dishwasher troubleshooting control panel dead [ 1 Answers ]

Kenmore ultra wash dishwasher worked couple days ago, now dead, as if no electric to the unit. No lights on panel--nothing.

My kenmore ultra wash dishwasher will not run the wash cycle, it fills then hums [ 0 Answers ]

My kenmore ultra wash dishwasher won't run the wash cycle, it fills with water then hums softly?

Kenmore ultra wash dishwasher control lock light won't go off [ 1 Answers ]

Kenmore ultra wash dishwasher control lock light won't go off, what do I do.

Kenmore Ultra Wash DIshwasher won't run through cycles [ 0 Answers ]

Kenmore Ultra Wash Dishwasher won't finish cycle. It runs continuously. Tried different settings. Very noisey.

View more questions Search