Ask Experts Questions for FREE Help !
Ask
    cconnely1757's Avatar
    cconnely1757 Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 26, 2015, 01:59 PM
    Rotary switch wiring to 3 socket lamp
    How wire 3 wire rotary switch to 3 socket lamp
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Apr 26, 2015, 02:29 PM
    Are you in the USA? Are the three wires white, black and green or bare?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

3 way Lamp rotary switch wiring [ 3 Answers ]

Rewiring a table lamp with a 3-Way rotary switch in base. Original sw. has 3 wires - Red #2 /Black #L and Brown 1 New switch as 3 wires Black #L Red #1 and Blue #2 Lamp bulb socket is Red for Small connection, Blue is Long center tab, White to neutral outside blub connection. I wired this:...

How Do I Wire Floor Lamp with Three Lights on One Rotary Switch [ 2 Answers ]

Rotary switch has Black, Red and Blue wires. Each lamp has 2 white wires.

Rotary switch wiring diagram [ 4 Answers ]

I purchased an old rotary switch, unfortunately without a wiring diagram. It has four settings (off, low, med, hi), and four wiring poles. Contacts rotate at two levels and connect the poles as shown in the attached JPG. My question is how to wire this thing (I assume there are three incoming...

Rotary Switch Wiring [ 1 Answers ]

I need wiring instuctions for a tower mfg corp. 6A. 120V 3-way rotary switch for a exhaust fan

Wiring up a desk lamp with a switch [ 3 Answers ]

I am re-wiring a vintage gooseneck desk lamp and I stupidly forgot to record which wires are connected where. I'm needing some assistance. I usually figure these things out, but this time, I'm stumped. There are two sets of wires coming from the two lamp sockets. Black and White. The...


View more questions Search