Ask Experts Questions for FREE Help !
Ask
    Kurt Fowler's Avatar
    Kurt Fowler Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 22, 2015, 04:13 PM
    Ridge pole hight?
    I'm looking to place a ridge on my house I'm building house its 32x32 I came up with10' 6" my pitch is 8\12! Any and all help would be great!
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 22, 2015, 05:34 PM
    We need more ifo to help you. What is your over hang on each side
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need help to figure out building a shed roof- height and length of ridge pole [ 1 Answers ]

I need help - first time builder 8 x 12 shed - need to know the height of ridge pole and length. I know on a 4/12 pitch it is 4 inch rise for 12 inch length, does this include the overhang. I would like to have about 8" overhang. Thanks

Ridge pole height [ 2 Answers ]

Trying to figure ridge beam support for full span of 8'1" with a 5/12 pitch and 5-1/4" ridge beam. I want to know support height from top plate to bottom of ridge beam .

What hight should I make my ridge beam [ 4 Answers ]

hello , I am building a shed that is 10x16 I want to install a gable roof and I don't know how high to build the ridge beam. Is a 10\12 pitch OK or too steep ? I also want to intall a reverse gable over a 5' opening at one corner of the 16' span thanks for your help Al

Line voltage thermostat wiring: replace single pole with double pole [ 7 Answers ]

Greetings, Current setup: Three small rooms, each with its own 120 volt baseboard electric heat, each with a 25 year old wall mount single pole, line voltage thermostat. All 3 room heaters are on the same breaker. Current single pole thermostat connections have 3 wires: black, red and white....

How can I lift or raise a pole that has settled or sunk in an existing pole barn? [ 4 Answers ]

My 25 year old pole barn has a couple of poles that have sunk six to eight inches and I want to jack them up in place. Is there a jack designed for this purpose or a suggested method?

View more questions Search