 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore dishwasher model 655.13462K902
We just replaced the heating element and we tested it by starting it up. It won't stay on. Runs for 3 minutes and the stops. The control panel blinks and the green light come back on with the start light blinking. What's going on?
|
||||
Check out some similar questions!
The dishwasher seems stuck in a diagnostic mode. I took off the kick plate, there were no directions to reset. I read it was Sanidry, and air dry, several times, but nothing happened. Under the Sense display that usually shows time, shows four led bars, If I press Normal wash one of bars reacts...
Kenmore ultra wash quietguard deluxe dishwasher model#665.17343 won't start. Unplug it for an hour or so ,then it will can on but stops working before it finishes washing. How do I fix it? Rose g.
I have a Kenmore 655 -15829 dish washer that looks like it is stuck in a diagnostic mode. Under the Sense display 4 bars are lit, and they go on and off by pressing different mode buttons. I took the kick plate off, there no directions for a reset, and I have not been able to find the button...
I have a kenmore elite front load model # 655/1657 and am looking to attempt a reset.
We have started experiencing a problem with our Kenmore Elite 655.15982 dishwasher. Each time we close the door, NoHeatDry/Lock lid would go on immediately. If you touch it, then LockOn lid would go on. Then no other buttons would respond. And often both NoHeatDry and LockOn indicators would be...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
