Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Relay or other option to simulate B wire when only O wire available?
[ 0 Answers ]
My geothermal heat pump requires a thermostat that provides both an O and a B signal. My Braeburn thermostat provides this, but I’d like to get something that is TCP/IP (Ethernet/WiFi) or Z-wave controllable. However, after extensive searching I’ve found that most high tech thermostats provide...
How do you wire an AC booster fan to the furnace blower relay?
[ 0 Answers ]
Well, there a lot of chatter out there about how to wire an AC or furnace booster in-line duct fan. The best advice I've gotten about how to use a sail switch for this was at this site, so now I'll ask how to do it another way. There must be an EZ way to wire a booster fan directly to the HVAC...
Blower relay
[ 1 Answers ]
In the cool mode the blower won't come on (refrigerant works). In heat mode the blower comes on and heats. The fan ON mode does not turn blower:) on. I jumped the fan switch to the 24vac cool wire blower still does not come on. Which relay is the problem and how can I diagnose it? I have one...
Blower relay
[ 2 Answers ]
The blower on my rheems criterion II gas heater does not shut Off how can I find and replace the problem View more questions Search
|