Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing pre-formed shower base pan
[ 3 Answers ]
Hello, I have a question with regards to installing a shower base pan. I framed up the walls for the bathroom and was getting ready to install the shower base pan (photo 1). There is a small gap between the face of the studs and the edge of the shower pan along the back wall (photo 2). The...
Copper pan - holes in base
[ 4 Answers ]
Has anyone ever heard of screwing down through the floor of a copper pan to hold it in place while they solder the drain in place? I saw a plumber doing this recently and thought it was crazy but he told me this is the correct way to do it. I would have thought that putting 4 holes in the base of...
How do I mount the adjustable shower drain to a wood floor?
[ 1 Answers ]
I am building a tile shower on a wooden subfloor. How do I attach the adjustable shower drain to the floor?
Installation of no-caulk shower base(pan)
[ 12 Answers ]
The carpenter rough-in is finished and I am getting ready to install a shower base that appears to be made of a very hard plastic material (this base has been in storage for many years). The base has an integral drain with a hard rubber gasket inserted from the top. There is no threaded top...
Leak in shower pan base
[ 2 Answers ]
I have a crack in my shower pan base... is there any way I can seal this without tearing out the whole shower? View more questions Search
|