Ask Experts Questions for FREE Help !
Ask
    mrdavejag's Avatar
    mrdavejag Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 22, 2015, 02:02 PM
    Will a AGC 10A 250V replace a T10AL 250V
    My on board battery charger on my boat has some inline glass fuses between the charger and the trolling motor battery. The original fuses are marked T10AL250V the only 10 amp glass fuses I can find are at Auto Zone marked AGC 10A 250V. Will they inter-change
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
     
    #2

    Mar 23, 2015, 01:04 PM
    Can it be done? - Yes. Would I do it or recomend doing it? - No.


    The T10AL 250V refers to a slow blow fuse. The reasons for it is so if the live voltage changes it can absorb some of the shock and still stay intact. The AGC fuse will blow as soon as it reaches load.

    In a pinch you can use the AGC but I would recommend getting the other fuses and using those for the long haul.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

38/250v outlet [ 1 Answers ]

What does this mean?

Extension Cord from 3 prong 50a 250v plug (male) to 3 prong 250v 20a (female)? [ 4 Answers ]

I want to connect my ac unit 208v need 20a fuses, to my stove plug which have a 50a 250v type outlets. I have this http://images.marketworks.com/hi/58/57750/pas5864-bku-ea-2.jpg And want to fit into this http://applianceguru.com/dryers/dryer_outlet.jpg

250v outlet ground wire [ 1 Answers ]

Hello, I recently purchased a house built in 1948. When I attempted to install my dryer, I realized the outlet was 3 prong 250v. A helpful post said that I could convert this outlet to 3 prong 240v. I have looked a little closer in the outlet and noticed there are two hots (red and black...

Change 250V Outlet to 240V [ 1 Answers ]

Hello, I recently purchased a house built in 1948. When I attempted to install my dryer, I realized the outlet was 3 prong 250v. Also, the fuse block that the previous owner had designated "dryer" contains 2 non-60 bussman cartridge fuses. So, I have two qustions: 1) Can I simply install a...

Changing a 250v receptacle to 120v [ 1 Answers ]

Thanks in advance for taking the time to read this. Basically, I Purchased a new washing machine. The receptacle for the old machine Appears to be, I believe, a 250v receptacle (it has two small horizontal Prongs and a circular (ground) prong)and it attached to a double breaker At the box. The...


View more questions Search