 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
You have a dead short. Did you wire the switch or is it the plug in type? Did the pump work at all with the old switch? How do you know the switch was bad? What were the symptoms that led you to believe that? The more information you supply the higher the likelihood you will get a good answer.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello all, my submersible pump is 200 feet down and is used for domestic water. Over the last couple of weeks it has started cutting out (usually over night). I can reset it at the control box, but the green light goes out after a few minutes but it still pumps water for a day or so. Today however...
Ac or heat pump will not come on when I reset the breaker it makes a humming noise about one second and then does nothing. It's a carrier 4 ton unit the unit is 12 years old the breaker does not trip. The fan does not come on either on the outside unit. The air handler is fine.
Sometimes when the outside unit comes on it clicks and tries to go off but clicks right back on and the fan doesnot completley stop or tries to reset it self
The lights are in a basement with a finished drywall ceiling. Two track lights operate off the same dimmer switch. Only one light worked, and didn't dim. I replaced the dimer switch and the same light works, and dims now. The other light still doesn't work. I changed the light bulbs, still no...
View more questions Search
|
