Ask Experts Questions for FREE Help !
Ask
    jdhodge's Avatar
    jdhodge Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 30, 2015, 04:05 PM
    Well pump question
    Well pump will not pressurize tank unless you reset the power, then it will work fine until the first refill, and pump runs all the time.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Jan 30, 2015, 06:08 PM
    Assume from this (unless you reset the power) that you mean reset the switch.

    Need a little info such as what type of pump (in the well or above ground) and what pressure the pump gets up to, even when it will not cut off.

    Could be the switch. Could be a pump going bad or other pump related issues.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Condensate pump question [ 2 Answers ]

I'm replacing a Little Giant pump that's wired into my HVAC as well as plugged into an outlet. Re the two low voltage wires on the pump, both are black. One is hooked to a yellow, the other to a red. I have 2 questions... Does it atter if the colors are reversed, AND, if I decid not to hook up...

Well Pump Question [ 2 Answers ]

Here is my problem - The pressure gauge is reading 47 PSI when no one is asking for water. I turn the water ON and the Pump comes on and the gauge slowly drops to 20 PSI and will stay at 20 PSI until I turn the water off. I have always had low pressure. I turn the water OFF and the Pressure...

Heat Pump Question [ 1 Answers ]

I had heat pump installed in March 2010. Last year in Eastern Washington winter was fairly mild, but right now temp is -8. Auxiliary heat has been running for four hours or more and cannot keep temp at 68. I have a pellet stove and that is helping keep the temp to 68 which is what aux heat is set...

Drilled well pump question [ 8 Answers ]

I have a drilled well with the pump feeding a pressure tank(wx-202)... the pressures are set at 30/50psi... but when the well pump kicks in there are air bubbles that make my faucets sputter and spit... I suspected there was a air leak in the well pump to pressure tank line but wouldn't I hear a...

Well pump Question [ 2 Answers ]

Hi, I am hoping someone can tell me if I can have my pump replaced that is a submerged one, with one that sits in the pump house. It is located 100 feet away from well itself. My subm. Pump has died and I don't have a clue on them at all. I have looked at another but it is not submergible. Can...

View more questions Search