Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have a early 90's Kohler shower valve and rounded out the cold stem valve seat.
[ 2 Answers ]
Should I drill then retap the threads? Thanks!
Shower Valve Stem Seat
[ 10 Answers ]
Thanks for all the help. I did look into the pipe and there does appear to be a seat, but it is in poor condition. My seat wrench doesn't seem to work. Would W-D 40 help? :confused:
How to seat a hot water valve?
[ 2 Answers ]
In replacing the water diverter stem (that the tip was broken off) of a two handled faucet tub faucet, after many attempts of placing it back on... The hot water keeps coming out the tub spout. I've tightened and tightened it back in and it seems useless. So, I have to cut off the hot water...
How do I replace a needle valve seat on a BS 14?
[ 3 Answers ]
I have BS 14 HP with a float type carb. I know the needle is sticking and flooding the engine/ oil/ ground with gas! I have ordered the new needle valve and seat. My question is how do I get the seat out? Does anyone have any information about how to remove one? Help please... Mower parked in... View more questions Search
|