 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore elite dishwasher control panel not working
I have a Kenmore Elite Ultra Wash Dishwasher, Model No. 665.1393*
The red light next to the Cancel button is on (steady, not blinking). It seems that this locks the control panel since pressing any of the other buttons has no affect. I've tried holding down the "Control Lock" button with no affect. By trial and error I discovered that if I turn the circuit breaker to the unit off then on again, the control panel is reset and works fine for a few days. This can't be good for the breaker. Any thoughts? |
||||
Check out some similar questions!
Dishwasher was working fine now has no power to the control panel, breaker not blown. Is there a fuse for this model? Was bought in Nov 2013. Full model# 665.12783K311
I have tried all the variations of Heated dry-Normal wash back and forth along with the sani-wash and heated dry that were listed on this site to reset the control panel on my Kenmore elite (665.19392) dishwasher. I still cannot get my dishwasher to run a test cycle. The bottom pump had come...
Kenmore Elite Dishwasher 665.17462300 control panel is stuck. The "Normal Wash" and the "Cancel Drain" light are on continuously, with no blinking. I have disconnected power, checked power, removed control panel cover, reseated the ribbon cable connector, checked control board for burns, all...
I've had a Kenmore Elite HE4T Dryer for the past four years and it's been working fine without a glitch until recently. A week ago, my dryer stopped working. I pressed random buttons and somehow got it to start again but yesterday, it stopped completely and I haven't been able to restart it. ...
For the life of me, I cannot determine how to remove the top Control Panel of a Kenmore Elite 110.24952300 Washing Machine. I want to hinge it back so I can remove the cabinet and access the pump. Am I missing the obvious?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
