Ask Experts Questions for FREE Help !
Ask
    josemad1's Avatar
    josemad1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2014, 05:51 PM
    Furnace troubleshooting
    Will like to have wiring diagram for millivolt thermopile/thermocouple connections.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 11, 2014, 05:59 PM
    Thermocouple screws directly into the gas valve. Thermopile usually has 2 wires that connect to the gas valve. Trace the old ones.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm Furnace Troubleshooting E2EB015HB furnace kicks on when suppose to and off [ 1 Answers ]

Furnace kicks on and off when suppose to but when blower shuts down the heating element doesn't have to flip switch to shut off element

Furnace troubleshooting [ 1 Answers ]

I have a two zone boiler system, one zone is turning on and off when not being called by the thermostat. My furnace is running constantly because of this. I changed the batteries in that thermostat what else can I do before I call someone in?

Furnace troubleshooting [ 3 Answers ]

How do I locate my furnace relay switch?

Furnace troubleshooting [ 0 Answers ]

I

Furnace troubleshooting [ 1 Answers ]

I have an amana furnace about 20 years old. Model #ghi115a35. When I put the thermostate at 70 or 75, does not matter, the inducer motor comes on, the glow light is on, the gas valve will open, but will not ignite the burners. Then the gas will close, I try again, about two times, then the gas...

View more questions Search