Ask Experts Questions for FREE Help !
Ask
    terrible4s's Avatar
    terrible4s Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 4, 2014, 02:07 PM
    Maytag Neptune MDG9700AWW Problem
    I have a Maytag MDG9700AWW dryer which suddenly stopped working. When it is plugged into the outlet there is a slight buzzing noise but nothing lights up. Please advise. Thank you in advance.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 4, 2014, 05:48 PM
    Make sure you have 240 VAC at the outlet. Sometimes one side of the double pole breaker goes bad and the dryer won't work.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag MDG9700AWW, gas dryer, no heat... [ 13 Answers ]

Hello, 1st post here,. I have a 5yr Maytag Neptune MDG9700AWW gas dryer that does not heat up. Vents are clean. I opened the front panel today to check and clean for lint. Then I powered up the dryer; the glow plug turned red, then the gas ignited. After about 7-8 seconds, the gas shuts off. I...

Maytag dryer troubleshootinglights on top dryer will not blinking maytag neptune [ 2 Answers ]

My neptune maytag dryer will not run but all the lights are blinking. Have unplug and fliped the braker still nothing. Modle#mde5500ayw ss#69495539Gj please help.

Maytag neptune what does dc mean [ 1 Answers ]

Maytag Neptune will not spin sounds like ground glass c flashing..

Maytag Neptune turning on problem [ 1 Answers ]

Maytag Neptune MDE5500AYW control panel lights work but dryer won't start running when pressing the start button.

How do you remove the front cover from a maytag neptune gas dryer model # MDG9700AWW [ 0 Answers ]

I am trying to replace the orifice in my gas dryer to convert it back to natural gas from propane. I bought the orifice kit, but it does not have specific instructions. I know I need to remove the front cover but do not know how to do this. I have a maytag neptune gas dryer, model # MDG9700AWW.

View more questions Search