Ask Experts Questions for FREE Help !
Ask
    jturnbaugh1956's Avatar
    jturnbaugh1956 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 17, 2014, 05:27 PM
    How do I wire a 4 wire intertherm limit has 1234 which goes where
    Wire need help where to put wires on 1234 terminals interthem elec fur
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Nov 17, 2014, 06:49 PM
    Search here for a manual Intertherm Electric Furnace Manual We need to know what model you have. Wiring and elecric furnace normally requires an electrician or some sigbifican electrical skill and experience

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low voltage wire to heating element gets hot and melts the wire and burns wire into. [ 4 Answers ]

Where low voltage wire from sequencer plugs into heating element gets hot and melts the wire. What causes this? I changed the wire out, but it does it again.

Explain which wire is ground wire when you have 2 black wires and 1 white wire [ 5 Answers ]

Explain which wire is ground when you have 2 black wires and 1 white wire

Is hot wire is not a neutral wire or vice versa in single phase two wire AC source? [ 1 Answers ]

I am a little bit confused why in AC single phase 2 wire source is merely classified the 1 wire as hot and other wire as neutral. The hot wire travels the current from the source to the load and going back the current to the source through the neutral wire. I know that in AC circuit, the signal or...

Black wire red wire and white wire spliced to 10/3 on a 220 circuit [ 25 Answers ]

I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...


View more questions Search