Ask Experts Questions for FREE Help !
Ask
    jpianc's Avatar
    jpianc Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 17, 2014, 06:48 AM
    Craftsman garage door opener keeps opening by itself
    Craftsman garage door opener keeps opening by itself... sometimes in the middle of the night ?

    Don't know why..?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Nov 17, 2014, 07:03 AM
    Reset all remote codes.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #3

    Nov 17, 2014, 06:58 PM
    Also make sure nothing is near either of the sensor eyes that shoot a beam of light from one side to another. I had one where the home owner stored palstic shopping bags in a bundle in the corner of the garage. Sometimes a breeze would move/float a bag into the beam

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman garage door opener [ 1 Answers ]

My garage door won't open but closes with Remote and built in car remotes(sensor) can anyone help, doesn't even do it from keypad.

Craftsman garage door opener keeps opening when trying to close... [ 3 Answers ]

It's as if there's something between the two eye beam fixtures at the bottom of the door. Opens fine. But try to close and it reverses direction immediately. The only way to close it is by holding the button until the door is all the way down. The unit is from May '94, is 1/2 hp, model#(?) is...

Craftsman garage door opener [ 0 Answers ]

Garage door opener won't close? Opened it up and now nothing. Here's what I've checked. Eyes are aligned - green light on sensors Noticed the door opened all the way to the stop bolt and was jammed. Released it and took off the chain. Rotated the stop sensors back so it was not touching and...

Craftsman Garage Door Opener light not working after new door installed [ 9 Answers ]

I have a Craftsman Model 139.18054 Garage Door Opener and the light has been working since it was (professionally) installed 7 or so years ago and up to last Monday when I had a new garage door installed. The installer said they did not do any thing to the unit except attach new safety sensors and...

Garage door opener prevents door from opening all the way -- how to fix? [ 1 Answers ]

My wife and I moved into a house three months ago and we didn't realize this problem before we bought it. I'm trying to solve a problem with an existing garage door and Genie opener which due to the amount of backroom along the tracks, doesn't allow me to open the garage door the full length...


View more questions Search