Ask Experts Questions for FREE Help !
Ask
    Micalobe316's Avatar
    Micalobe316 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 15, 2014, 08:01 AM
    Goodman furnace short cycling
    I have a goodman central heating unit that's about 7yrs old. I turned it on for the first time this season and it won't blow any hot air so I cleaned the flame sensor with high grit (265) sandpaper and it still short cycles. Also the only error the error light gives me is a solid red with no flashes. Does anyone have any ideas?
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Nov 15, 2014, 01:59 PM
    What's the model number of the furnace? Do the burners ignite?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace short cycling [ 1 Answers ]

When comes on it runs for approx. 15 sec blowing warm air then off for approx 20sec continues this until thermostat is satisfied. Replaced thermostat with digital no difference from old mercury unit. What can I check next? Thanks Charlie

Furnace short cycling [ 0 Answers ]

Hello, I have a furnace that short cycles.I believe the problem ls with fluctuating natural gas pressures or tempratures that are feeding to my furnace and PILOT system from the local utility company. Before starting the furnace the pilot is fine.The flame from the pilot splits in 2 flames.One...

Is my furnace short cycling, or something else? [ 11 Answers ]

Hi guys, I have a forced air Tempstar propane Furnace with a weird problem. It starts pretty normal: The thermostat tells it to turn on and the main blower for the house vents starts up. Shortly later the exhaust blower starts and the burners ignite as normal. Then it gets weird. The...

Short cycling furnace [ 0 Answers ]

Hello Again, Thank you for the previous help suggestions. The last suggestion I received mentioned the possibility of a defective limit switch. I replaced the switch but that did not solve the problem. However, I did received a fault LED, "defect or flaw in gas flow". I checked my line,...

Furnace Keeps Short-Cycling [ 1 Answers ]

I have a Trane XL80 (Model #TUD060A936A0) that has been converted to a White-Rodgers (Model #50E47-060). When the thermostat calls for heat, the furnace short cycles until it is manually shut off. There is no indicator light on this unit to tell me what the problem may be. What else could...

View more questions Search