Ask Experts Questions for FREE Help !
Ask
    jpcummins's Avatar
    jpcummins Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 14, 2014, 05:37 AM
    I came home last night to my vision pro 8000 screen saying EE it is a yr old
    I came home to a cold house last night the screen says EE and no heat. I tried reseting it and putting in new batteries but nothing What does EE mean can't find it in my book
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 14, 2014, 07:10 PM
    In spite of all my searching, I can't find anything in a Honeywell manual mentioning an EE code. In posts here & elsewhere most say the thermostat is bad. You can try calling Honeywell but I doubt you will get an answer until Monday morning. Please post back with what you find out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connecting a Pro Vision 8000 to a Rheem heat pump. [ 0 Answers ]

Having trouble getting new Honeywell TH8320 digital thermostat to work with my Rheem split unit heat pump. I used the manual that came with the thermostat and hooked it up as instructed, but had the orange wire left over. After some research I figured out that the blue wire should be connected to...

Honeywell vision pro 8000 installation [ 1 Answers ]

I have a Trane Model XR 90 High Efficiency, 100,000 BTU’s to heat a two-floor space with about 1900 square feet. When the outside temp. is around 20 degrees F and I set the thermostat to Hold at 63 degrees during the nighttime, when I get up the thermostat is reading 60 degrees. It cannot keep...

Vision pro 8000 screen comes up as EE, have troubleshooted as said in the manual? [ 4 Answers ]

Ive got a vision pro 8000 thermostat, a few days ago the screen came up as EE I had changed the batteries in the back and got it working again, however I got the same problem yesterday and even though I changed the batteries the sign came up again after a few hours any help?

Switching from robertshaw CM260 to a honeywell vision pro 8000 [ 2 Answers ]

I am switching from a Robert Shaw cm 260 to a Honeywell vision pro 8000 (TH832OU1008 and on my Robert Shaw there is a spot for a white wire that connects to "O" but that is no where on my honeywell? Where does that wire go?

Honeywell Vision Pro 8000 TH8320 wiring [ 8 Answers ]

Hello, I have a 2-stage heat, one stage cool heat pump. I am trying to wire this thermostat but it is not working. I called a professional and she told me to wire it as follows, but the heat will never kick on no matter how long I wait. Left Side Heat Pump Y2-No wire L-No wire E-No wire...

View more questions Search