Ask Experts Questions for FREE Help !
Ask
    annestjean's Avatar
    annestjean Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 13, 2014, 12:06 PM
    Kenmore elite dishwasher troubleshooting model 665.1277
    Dishwasher will not go through any cycles. It starts up, takes in a little water, and then it cancels itself and pump the water out after about one minute. This happens no matter what cycle I push. Any suggestions?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Nov 16, 2014, 07:59 AM
    Check the overfill protection float and make sure it can move freely. It sounds like the float it stuck in "up" position. Push down on it to free it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore troubleshooting dishwasher model 665 [ 0 Answers ]

Hi I have a Kenmore Ultra Wash Dishwasher Model 665.1326. The lower wash arm does not seem to be moving. It seems to be looked in place correctly but it seems to be butting up against the overfill protection float. Otherwise it seems to be working properly and sounds just fine. Why isn't it...

Kenmore Elite Dishwasher Model # 665.1375 [ 2 Answers ]

Unit is about 5 years old, never had a problem. Now it is not working at all. Totally dead, no lights. There were no previous symptoms, the previous load the day before worked great. Any suggestions? Did the fuse blow? Where is the fuse located and how do I get to it?

Kenmore elite model 665 troubleshooting [ 0 Answers ]

The lock on button won't shut off so dishwasher won't run. I've pushed the heat off button as suggested and cancel and tried shuting off power at breaker. Any ideas? This is on the Kenmore Elite 665 dishwasher.

Kenmore Elite Dishwasher Model 665 [ 0 Answers ]

Timer seems to get stuck on 82 min. if you shorten cycle it stops on 39 min.

Kenmore Elite Dishwasher Model 665.15979 [ 1 Answers ]

I have a kenmore Elite model dishwasher and the Lock On light is flashing. I have attempted to press the No Heat Dry / Lock Off button to turn off the Lock On feature (in accordance with the owners manual) but nothing happens. The only button on the control panel that works is the Drain / Cancel...

View more questions Search