Ask Experts Questions for FREE Help !
Ask
    squissman's Avatar
    squissman Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 12, 2014, 08:49 PM
    HVAC Lennox Thermostat status?
    We have a Lennox 27H3101 thermostat. It is making a clicking noise and then stopping. Now, it only says the time and "-AC". I replaced the batteries two days ago.

    Earlier today, when we used the slider to select heat, the house filled with white smoke and the breaker tripped. The thermostat still says the time and "-AC". What does that status mean?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Nov 13, 2014, 06:56 AM
    On some thermostats the "AC" display means there's either a problem with or no 24 volts AC being supplied to the stat. Since the house filled with smoke, I STRONGLY suggest getting a qualified local HVAC service person to check the furnace.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing Trane Thermostat BAYSTAT240 with Thermostat LENNOX 81M28 [ 3 Answers ]

Hello Currently I got the Trane Thermostat BAYSAT240 controlling my Furnace - Heat Pump Combo My setup is almost the same as described in the posting called: Wiring Thermostat Honeywell 8320U to Furnace-heat pump Trane XE78+XE1000 Combo Except that I control everything from one Thermostat ...

Lennox T90H110A137 Thermostat / Hunter 44665 Thermostat ? [ 1 Answers ]

I have a Lennox T90H110A137 Thermostat with the following terminal letters and wire colors: G - blue wire F - red wire C - green wire H - yellow wire V - white wire I want to connect it to a Hunter 44665 Thermostat which has the following terminal letters: Y1 RH

New Lennox HVAC problems [ 14 Answers ]

New Lennox XP-19-036 3 ton heat pump/CBX32MV-036 3 Ton Air Handler installed 9-24-07 11/29/07 heat pump quit, heated house with aux heat only, would not come up to temp set point. Shut off both breakers, air handler started, plenim temp ran up to 118 deg, 39 min later, heat pump quit. Shut off...


View more questions Search