Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Convert copper faucet water line to flexible
[ 2 Answers ]
I have a bathroom faucet that has long copper supply lines. Can I cut them and fit flexible tubing to them to fit them to the shut off valves?
Disconnecting Faucet Sprayer Hose From Supply Line
[ 8 Answers ]
Hello, I'm trying to disconnect the hose of my faucet sprayer from the faucet and the location of the connection is right in between the cold and hot feeds and the basin of the sink. Basically, there is no room to get even a basin wrench in there. I believe it's a compression fitting which...
Can I replace my flexible faucet line with a copper line?
[ 2 Answers ]
Yes, that's right I would like to replace my flexible line with a copper line? How easy would this be and is it possible? Reason I need to install a saddle valve to hook up to a ro/di unit.
After shutting off the main line to fix a faucet, another faucet started running slow
[ 3 Answers ]
I shut off the main line to fix the tub faucet. When I turned the main line back on the sink, in the same bathroom, had low water pressure. This wasn't the case prior to the job. It's very cold now so I thought perhaps a water line was frozen, however, every other faucet in the house is running...
Replace outdoor faucet and line
[ 3 Answers ]
I would like to replace my outside faucet and the plumbing line leading into the basement because both are broken and the line is corroded in the basement. If I cut the line off where it goes out of the basement, can I just pull it out from the faucet and rethread a new copper pipe through the same... View more questions Search
|