Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How can I add a light fixture before a ceiling fan light with switch at end of run?
[ 1 Answers ]
I have a ceiling fan light fixture with power entering (R,WB wiring) from left side and the switch that controls the fixture on the right side (R,W,B wires) I want to add a light fixture before the fan/light and have it controlled by the same light part of the switch at the end of the run. That...
Ceiling light fixture shorted out
[ 1 Answers ]
I think a Ceiling light fixture shorted out because bulb wattage too high (2 x 100 watt when fixture called for 2 x 60 watt). Changed bulbs, not working. Tested the wall switch but tester shows no power to wall switch.
Ceiling light fixture blew two light bulbs in 2 weeks?
[ 1 Answers ]
I have 2 ceiling lights in one room that turn on with a single switch. One works fine every time. The other has blown 2 lightbulbs in 2 weeks (incandescent). There were CFL's in them earlier and I took them out to replace them with the incandescent type. The first one seemed to burn out after a...
I have connected the light ceiling fixture but the light remain on cannot switch off
[ 7 Answers ]
I have two black wires, one red, one wihite out of the box. I have connected the two blacks with the black fixture, and white with the white fixture wires. The red is not connected. The light (florescent U-tube light) comes on, but stays on, regardless of the switch being in the on or off position,...
How to connect a ceiling light fixture
[ 8 Answers ]
I just moved into a house where the seller took the kitchen light fixture. I am planning to install a new light fixture. I believe the outlet may be controlled by two different switches, and I'm not sure how to connect it. The box in the ceiling has 3 wire screws. One covers a black wire, one... View more questions Search
|