Ask Experts Questions for FREE Help !
Ask
    ybalaji1982's Avatar
    ybalaji1982 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2014, 10:17 PM
    Trane voyager package unit expansion issue
    Dear all,
    I Balaji ac technician working in Oman
    Recently I was serviced Trane voyager package 20 ton approx and the model no:TCH200ED00AB WHICH IS CHARGE r410a I can find the expansion valve where
    Kindly give me a idea how or where it located and logic need any related detail even photo video I will post on this same page

    Regards
    Balaji yuvaraj
    Oman

Check out some similar questions!

I need the parts of package type Trane Air-con air handling unit's bearings [ 0 Answers ]

Lp heating package unit trane not working [ 1 Answers ]

The new board is now saying its bad this is the second board, 2 fuse link,new inducer motor all new except the diaphram and no heat had it running for about 3 days and now this

Heating issue with Trane heat and air unit [ 1 Answers ]

I have a Trane combined heat and air unit. The heat is working intermittently. When it quits working the word "Heat" flashes on the thermostat. The weather has been above freezing for the past four days. Last night it did get down to 30 degrees but a week or so ago it stayed below freezing for...

Package unit VS Air Handling Unit [ 1 Answers ]

I want to know which is the best to use for a Seminar Room. The package unit or an AHU with condensing unit.

Trane package unit [ 5 Answers ]

Hi all I'm having a problem with a unit runs good ,cools good, unit will run fine then just shut off ck unit giving no codes reset unit it runs fine until it just shuts off again

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.