 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
http://www.grainger.com/ec/pdf/Typic...ng-Diagram.pdf Don't know but did find the above. The first is very poorly written, the second is various wiring diagrams. Appears that motor wiring is designed so that it can be used when unit has separate capacitors for fan and compressor or when unit has a duel capacitor for the fan/compressor. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello, I have an A.O. Smith Condenser Motor and told this was the correct replacement. The old motor is 3-wire and the new motor is 4-wire. I have attached images. Can someone please explain which wires on the new motor go to the old connections. This is an image of the Wiring Schematic on the...
Old condeser fan motor 3 wires 2 went to old capaciter 1 to relay on defrost board,, new motor 5 wires I brown 1 brown w/white stripe,red low speed,black high speed and white should brown and brown with white stripe go to new (separate capacitor?) and red to defrost board and white to contacter?
I have a Trane unit with GE condenser fan motor number 5kcp39fg. New condennser fan motor is A.O. Smith number F48k92A01. My question is on the old fan motor there were only 3 wires two for cap and looks like 1 for motor line and the new motor has a brown and brown/white for cap a black for line...
I have a Rheem a/c unit that the fan motor quit. I took all the information off the old motor and went to a local supply store and they cross-referenced the numbers and gave me and Emerson motor. All the specs are the same, 1/5 HP, 1075 RPM, 60 Hz, 1.3 Amp, single phase. When I got home, I took...
The old condenser fan motor (EMERSON model # is K48HXFCN-3727,HP-1/8,v 208-230,rpm 1075with 3mfd 370vac dual capacitor) is making a noise.When I got a new one (EMERSON model#is K48HXTMG-4003 HP-1/8,v208-230,rpm1075 come with 5.0mfd 370vac capacitor). I am confused, I need help trying to do the...
View more questions Search
|
