 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to hook up AO Smith SQ1102 to Intermatic ET8215C
I hooked up my A.O. Smith SQ1102 motor to a new Intermatic ET8215C timer. I put hot line in to terminal 2, neutral in to terminal 1. Pump hooked up to circuit/load 1 (black to LINE and white to LOAD.) I also hooked up my solar heater to circuit/load 2 (again black to LINE and white to LOAD.) When I put the thing in MANUAL and press the button for circuit 1, all I hear is a click from Intermatic - no Pump Motor start up.
Voltage set to 240V. Switch set to IND. Any ideas? |
||||
Check out some similar questions!
Currently have washer and dryer in the basement. Would like to hook up washer and dryer immediately above these in my garage. The current drain system to the washer and dryer does not have a vent, do I need to add one. If I run the drain for the washer in the garage can it be connected to the...
Capicator wire diagram on 3/4 ao smith pool booster pump 2 yellow 1 white wire from motor pump is 10 years old
I am working on an Intermatic T101 timer. The unit is not turning on the lights at the expected time. I inspected it and saw that motor is not rotating and replaced it just today, unfortunately the motor is still not working rotating. I left the lights powered on by use of the 'manual on position'...
Hi I just installed a Intermatic T103 timer to my water heater. It doesn't seem to be working. I hooked it up two different ways and still the timer stays still. I first hooked it up as the spec. lines 1 and 3 were my line and lines 2 and 4 were my load nothing. Than I tried because it is a 220v...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
