Ask Experts Questions for FREE Help !
Ask
    quaker137's Avatar
    quaker137 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 26, 2014, 02:45 PM
    Ceiling fixture lights up as if getting half power
    Ceiling fixture with six lights comes on as it's getting half power. How do I fix this?
    It was brighter before.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Sep 26, 2014, 04:36 PM
    Before what?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why no power to light fixture when other lights on same circuit are fine? [ 3 Answers ]

While attempting to install a replacement light fixture, the fuse blew so I attempted to improve the electrical connections to the light fixture and then I reset the fuse. I then heard a fairly loud buzzing noise and within about 3 seconds, I manually flipped the appropriate fuse breaker to the off...

I have a similar problem. Main power is coming in at the ceiling fixture, not at one [ 6 Answers ]

I have a similar problem. Main power is coming in at the ceiling fixture, not at one of the 3-way switches, and there are several black and white leads at the fixture junction box. All red leads are lumped with one wire nut. And whites and blacks were also lumped in a certain way. After replacing...

Light fixture shorted out, replaced fixture, now no power [ 4 Answers ]

In my bathroom, I have 1 grounded receptacle, & (1) 2 wire light switch that controls the 4 bulb light fixture. This is on a circuit with my upstairs lights & outlets, which all work with no problem. The bathroom receptacle has never worked, I replaced it after moving in house 10 years ago, & it...

How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power and 12-2 to lights [ 1 Answers ]

How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power wire source and 12-2 to between the 6 lights and then using 12-2 witing to the single pole switch?--need your help please


View more questions Search