Ask Experts Questions for FREE Help !
Ask
    StockLoser's Avatar
    StockLoser Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2014, 09:13 PM
    Fixing Toilet Flange
    My toilet leaking water when flush and I took it off to replace the bee wax and found the flange is damaged. Probably from overtightened the bolts. I would like to replace the toilet flange. Is it possible to replace it? If not replacing the flange what can I do? Thanks.

    Name: 20140925ToiletFlange_001.jpg Views: 523 Size: 418.8 KB
    Name: 20140925ToiletFlange_004.jpg Views: 295 Size: 287.5 KB
    Name: 20140925ToiletFlange_005.jpg Views: 285 Size: 406.7 KB
    Name: 20140925ToiletFlange_006.jpg Views: 305 Size: 439.6 KB
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Sep 25, 2014, 10:10 PM
    Repair using flange repair kit
    Attached Images
     
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #3

    Sep 26, 2014, 10:45 PM
    You can use the repair kit or replace the flange assembly see the image below, good luck.

    John
    Attached Images
     
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #4

    Sep 27, 2014, 12:20 PM
    Those are flange extension plates, John... Not thick enough to act as a flange or flange repair by itself. The best option here is the repair flange as posted by Harold.

    Good day guys!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove a cast iron toilet flange to install a pvc no hub flange [ 1 Answers ]

Fixing broke flange [ 1 Answers ]

The flange to my toilet broke.my local hardware store sold me a flange cover.how do I install it.does it just fit over the old one?

Looking for good Advise on replacing toilet flange on concrete slab to install toilet [ 26 Answers ]

To whom it may concern: I got a problem with a toilet that has been rocking and twisting for quite some time until it started leaking and what now I pull up the toilet to find out that the flange is broken on one side. I tried that flange plate from home depo but it won't work because the slab is...

Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange [ 1 Answers ]

We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange

Options for fixing this closet flange and bend [ 10 Answers ]

I'm putting in a new tile floor that after leveling and cement board will raise the floor by at least one inch. So I must raise this cast iron flange. (OD 4-1/4”) However, I'm not sure what option I should use. You can see it is very corroded. Do I try to find an extension to raise it? (If so,...

View more questions Search