Ask Experts Questions for FREE Help !
Ask
    vipervin's Avatar
    vipervin Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 13, 2014, 06:09 AM
    Ask the plumber for free
    It is permissible to weld schedule 10 steel piping to schedule 40 on a fire sprinkler system. I do not see a code that pertains to this .

Check out some similar questions!

Ask a plumber for free [ 1 Answers ]

What are the metal slotted tabs on the sides of a new apron tub for?

Ask a plumber for free [ 0 Answers ]

Recently our water pressure has been droping way down if the shower is on and someone flushes the toilet or turns on another faucet. What could be the cause of this? I checked the water pressure outside and it shows 80 PSI. Thanks

Ask a plumber free [ 8 Answers ]

A licensed plumber installed a drain vent pipe for a garage bathroom and simply capped it off in the wall - solid cap. He did not take it up into the attic or through the roof. He says it meets code - I think he's being lazy because he'd have to through a joist to get it above the interior wall. ...

Ask a plumber for free [ 5 Answers ]

Hi We have 1 rad going through a 10mm pipe on our system, the other rad's are going through 15mm pipes. This one rad is cold from the bottom up, only the tip of the top is getting hot. Is there anything we can do? The plumber has suggested changing the pipes to 15mm?

Ask a plumber a question for free [ 1 Answers ]

Cost to replace old tub drain and overflow system


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.