Ask Experts Questions for FREE Help !
Ask
    gerner91's Avatar
    gerner91 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2014, 02:45 PM
    Rheem classic 90 plus, pilot light
    I am trying to get our furnace turned on. I have turned on the heat at the thermostat, it clicks, but there is no flame or blower coming on. How do I light the pilot light for the Rheem Classic 90 plus?
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Sep 11, 2014, 04:50 PM
    That furnace has a spark ignitor, no pilot light. Do you hear any clicking when it tries to start?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Rheem HVAC classic 90 plus that will not light. [ 2 Answers ]

I have a Rheem HVAC classic 90 plus that will not light. I clean the igniter with a piece of sand paper, but it still won't light. The top light of three won't light up neither. I had water go up about 16 inches up from the bottom of the furnace.

I have a Rheem HVAC classic 90 plus that will not light. [ 2 Answers ]

I have a Rheem HVAC classic 90 plus that will not light.I clean the igniter and it the furnace still won't light up. I had about 16 inches of water come in from the bottom. The top light of three lights won't come on.

Rheem Classic 90 plus furnace - how to light the pilot? [ 1 Answers ]

Upstairs furnace is working fine. Downstairs furnace the LED on PCB are not lit. How do I lite the pilot?

Rheem classic 90 series pilot light [ 2 Answers ]

The pilot light on my furnace went out & I can't figure out how to relight it. It did it a few months ago & my ex (who wasn't my ex at the time) found the instructions & easily got it going again. Since the weather was good I had the thermostat off for about a month just like I always do. Now it is...

Rheem HVAC classic 90 that will not light [ 2 Answers ]

I have a Rheem HVAC classic 90 that will not light The electronic igniter will not lit the burners I have changed the igniter and still will not work I can light the burners with a match but when it gets to temperature it will not light for the next cycle

View more questions Search