Ask Experts Questions for FREE Help !
Ask
    Kendalleugene's Avatar
    Kendalleugene Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2014, 10:42 AM
    S8610u damper error code
    Hi, I'm using this unit on an outdoor natural gas firering. No damper involved. Getting 5 flash damper error code. Good ground, serial number starts with 1429. Any suggestions. New unit just wired month ago.

Check out some similar questions!

Error code 12 [ 1 Answers ]

Bryant gas furnace is flashing error code 14 when furnace not running.I turn power off wait then turn on and furnace started up

Honeywell S8610U, code 5, damper error [ 14 Answers ]

There is no damper. This is the third unit with the same problem. The first unit lasted 2 years. The second one lasted 5 days. This last one lasted 3 months. I've had a HVAC Technician look at it each time; he concludes that the unit is bad. Bad manufacture ? Any ideas on anything to look...

After replacing the door lock F DL error code, it still gives the same code and won't [ 1 Answers ]

Model # 110 45976 400 After replacing the door lock F DL error code, it still gives the same code and won't start? Original problem sometimes door would not lock then it would, this time it started then stopped in middle of cycle with water left in tub and same code.

S8610u fault code number 26 [ 0 Answers ]

Error code 31 [ 7 Answers ]

I have a carrier furnace flashing error code 31 which states: 31-Pressure, draft safeguard, or auxiliary limit (when used) switch did not close or reopened. How do I fix it?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.