Ask Experts Questions for FREE Help !
Ask
    lwilson9111's Avatar
    lwilson9111 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 9, 2014, 08:41 AM
    Solonoid installationon craftsman 2
    Need to know what wires go where on the solonoid on a sears craftsman ii mowe

Check out some similar questions!

Solonoid [ 1 Answers ]

Some solved problems on solenoid

Honda3011 Starter solonoid [ 6 Answers ]

My Honda3011H usually does not start. A small engine mechanic said it's the seat switch so he bypassed that. Still the same problem. Only starts ones in about 10 tries. When you turn the key to start, there is no click or any noise. Once in a while, its starts fine and if I shut it down it will...

Torque converter clutch solonoid valve circuit [ 2 Answers ]

I just installed a new (used) transmission in my 02 civic. I am getting an error code... flashing d light. The code is p1753. The car drives but is sluggish in the low end. Any input as to shere and what I am going after. I still have the core so ican draw parts off the old transmission. What am I...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.