Ask Experts Questions for FREE Help !
Ask
    justadumbass's Avatar
    justadumbass Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 1, 2014, 07:26 PM
    My trane furnace blower will not start
    My trane furnace will light up and on board calls for normal heat I hear clicking for the motor to start but it won't it also will not start from on switch on thermo stat I put a new motor in and capacitator and it does same thing , is this a circuit board problem ?
    justadumbass's Avatar
    justadumbass Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Sep 4, 2014, 05:14 PM
    Well I took apart the motherboard from mounting pan and it was arced out in back so its going now after changing it. No need to respond.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower motor of Trane XE80 furnace won't start [ 8 Answers ]

I have a Trane XE80 gas furnace. The purge motor and burner go on, but main motor won't run. LED flashing light flashes continuously when burner is on however, when the burner shuts off, the LED light flashes 4 times at an interval. I tried to look for a reset button on the main blower motor but...

Trane XR90 (3 years old) Indoor Blower will not start. [ 2 Answers ]

Indoor Blower Motor would not turn off in any mode. Furnace would heat would work fine and shut down "except" the indoor blower continued to run. I replaced the Stat with the same result. So I reinstalled old Stat. Replaced the Intel-Ignition Circuit board 50A65-475 with the White_Rodgers...

I have a trane eletric ignition heater and blower furnace is heating up but no blower [ 1 Answers ]

My thermostat is a white /rodgers module this clicks to start but no air blowing from the furnace in the attic which is a trane model and the same with cold air the thermostat clicks the ducane model outside whirs but no cols air.

I have a Trane XL80 Furnace blower problem [ 0 Answers ]

I have a Trane XL80 Furnace. The blower doesn't seem to put out much force. I'm wondering if there is a way I can speed it up? In the winter it seems to do fine but in the summer it doesn't seem to keep up. I've replaced centeral air compressors since and have been told they are the right size but...

Trane Gas Furnace. Blower will not come on in [ 5 Answers ]

My Trane gas furnace will light and burn fine. The blower will not come on in the heat position but will work when the air conditioner is on. What part controls when the blower comes on for heat. The furnace cuts itself off after about 1 1/2 minutes from over heating.

View more questions Search