If a sub-base has a RC & RH and one transformer what should I do?

DskiNewbie Posts: 2, Reputation: 1

New Member

Sep 1, 2014, 09:37 AM

If a sub-base has a RC & RH and one transformer what should I do?

Hooking basic system with one transformer where do I wire RC & RH

bitters Posts: 348, Reputation: 12

Full Member

Sep 1, 2014, 10:36 AM

Jumper RC and RH.

ma0641 Posts: 15,675, Reputation: 1012

Uber Member

Sep 1, 2014, 12:26 PM

RH is heat only, RC would be Cool only, jumping RC/RH gives you both.

Add your answer here.

Check out some similar questions!

How do I match ohms & amp; watts with a bass amp head and amp; speakers? [ 0 Answers ]

I need to shop for new speaker(s) to use with an amp head that I have and want to know what to look for in specs of watts and ohms so that I don't blow up or fry anything. My head's specs say "120 VAC, 60 Hz, 600 Watts" and under the Biamp (Low/A, High/B) Speaker Output jacks it says "4 Ohm Min....

Can a 150 amp meter panal handel a 100 amp, 40 amp, 30 amp and 30 amp brakers. [ 2 Answers ]

My meter panal is a 150amp panal. I have a 60 amp sub panal coming off it a 30amp to my stove a 30 to dryer and a 40 to the a/c. i want to upgrade the 60 amp sub panal to a 100 amp panal. Will the 150 amp meter panal handel it or do i need to have a 200 amp meter panal installed

Running 2 100 amp breaker boxes on 200 amp meter base [ 1 Answers ]

I have 2 100 amp breaker boxes,but the meter base is 100 amp.Wanting to put 200 amp metet service with disconnect box.Can some one tell me if this is possible.and how you would connect the 2 breaker boxes to the disconnect box.Thank you