Ask Experts Questions for FREE Help !
Ask
    mikepek's Avatar
    mikepek Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 28, 2014, 10:01 PM
    What does it mean when a car engine won't turn by hand from flywheel?
    Automobile;
    My mechanic just told me that as he was trying to take out the engine from my truck so that he could work on the truck, the engine wouldn't turn. What are the likely causes? The truck was in a collision.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #2

    Aug 29, 2014, 05:18 AM
    Your mechanic should be able to inspect that for you. We can't see the engine to assess the damages, if any.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #3

    Aug 29, 2014, 02:20 PM
    Jammed flywheel or pulleys. Did you hit someone? that would be a logical reason.
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
     
    #4

    Aug 29, 2014, 04:34 PM
    Why doesn't your mechanic know WHY?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why won't the new starter not move the flywheel when the flywheel will move by hand? [ 3 Answers ]

The flywheel seems to lock up when trying to start.just put new starter in, the motor turns by hand at the flywheel and front of engine. But yet it seems to try and start but just stops with a clunk.there is no teeth missing from flywheel, made sure to check for that also. Can u Help?

My car won't start, eletricals all work, but car doesn't even try to turn over. [ 1 Answers ]

My car has never had any trouble starting. I came out of work yesterday where it was very cold and I put my key in my ignition and then pushed in the clutch fully and turned the key. All the electrical stuff like radio, dash, and lights all work, but the car wouldn't even try to turn over. I heard...

Engine won't turn over [ 2 Answers ]

I have a 24 hp B&S intek ohv. I have checked ground, cleaned cables, starter was bought at the end of last year only used a few times. I had an auto parts store check the battery and they said it was good, but the battery is over two years old. When I turn the key it turns about a full rotation, it...

Flywheel won't turn [ 27 Answers ]

Ok, Yardman is several years old (I believe about about ten years or so) but I have had it a few months. Worked fine for awhile. Last few times I would cut it would cut for a good while then it would just cut off. Battery is weak so I would always have to jump it off beforehand. No problem with...


View more questions Search