Ask Experts Questions for FREE Help !
Ask
    darren elgey's Avatar
    darren elgey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 27, 2014, 08:55 AM
    I have a power max heating systerm and I need to replace some taps .
    Please can you help . I have a power max heating boiler and need to replace a tap so need to know how to turn the hot water supply off , thank you
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Aug 27, 2014, 10:18 AM
    Can you post some pics of the boiler? When you say " tap" do you mean like a drain valve?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove the cap around the taps to replace tap washers for Imperial taps. [ 6 Answers ]

How to remove the cap around the taps in order to replace washers. My tap brand name is Imperial. The cover (cap) is round and triangle if looking from one side. There is no place to hold, grip and turn the cap.

Water stops in hot taps pumped shower,immersion fed by oil fired heating. [ 1 Answers ]

I fixed a rat eaten pipe had to do the usual stuff to get rid of airlocks,3bathrooms,2off this problem immersion/pump.I have used a wet vac got water out of pipes,I have opened up joints got air out of these also,but still after a minute of pumping water trickles off stops!I have done a lot of...

My water is not heating in my taps but my raidtors are warm I have oil heating/ [ 1 Answers ]

Bathroom Taps - Mixer Tap v Individual Hot & Cold Taps [ 1 Answers ]

Hi, I have a question about Bathroom Taps. I am buying a Mixer tap for my new washhand basin which has one hole for the tap. My bath has 2 holes i.e.. One for a hot tap and one for a cold tap. I would like to buy 2 bath taps similar to my mixer tap but they don't appear to be...

View more questions Search