 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Low water pressure in kitchen faucet after replacing dishwasher
Replaced dishwasher and ran a test cycle with positive results (water in the unit while running). Then the HOT water in the kitchen sink was suddenly very low. We then ran a full load (successfully), and now both hot and cold are very low pressure. I flushed the pipe going to the dishwasher, and it worked fine. The pipe going to the dishwasher is THE ONLY pipe that has high water pressure. Even when not connected to the dishwasher. All of the rest of the pipes going to the sink faucet it's self have no pressure.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I installed myself and had to replace the cold water shut off valve already. I have flushed both the hot and cold supplies already by removing one and turning the water on. Pressure on both sides are good and more importantly equally. The sprayer that's on a separate line from the valve assembly...
Hello... . I am hoping someone can help me. We installed a brand new dishwasher last week and now the kitchen faucet barely has any water pressure. It started fine, then we thought we heard a slight "klunk" a couple days later, and now there is barely any water pressure. The faucets in the...
The kitchen has a 200? Moen Monticello faucet and we are getting low water pressure from both cold and hot. Had plumber here and he took something out from under the sink and cleaned it out, then he unscrewed the end of the faucet and cleaned that out, and then he took the faucet off from above the...
I'm hoping that someone can help me on my issue because I am at my end! I recently replaced my kitchen faqucet with a Peerless, two handle faucet with sprayer. Since then my water pressure has been poor. I then took off the sprayer and capped the middle threaded outlet underneath but I still have...
I turn on my hot or cold and just getting half of what I should have, I checked the aereator and it it OK, Fixture is 2 yrs old, hot and cold handles. I unscrewed top knob to take apart but could not unscrew the handle or cap. Help
View more questions Search
|
