Ask Experts Questions for FREE Help !
Ask
    giznan's Avatar
    giznan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2014, 09:26 AM
    How do you pressurize a challenger series diaphraghm well tank
    I need to know how to pressurize a challenger series diaphraghm well tank.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Aug 5, 2014, 12:04 PM
    You should have had instructions with the new tank. You pressurize the tank at the snifter valve located on top of the tank. Set your PSI at 3 PSI under the cut in point on the control box. Good luck Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Challenger series well tank [ 2 Answers ]

While water was in use last night the water stopped coming to the house there is 15 lbs pressure in the tank over night the enough water came in to fill the tank on the toilet, does that mean my pump is OK? There is a little water coming out not very much. Any ideas??

Challenger diaphragm well tank [ 10 Answers ]

I put a new pump and drained the line. After putting a new pump in and starting the system back up. It will turn on at 40 psi and off at 60 but it cycles every minute and a half. Its acts like I do not have a well tank in the line. My question is can this tanks get air in them? I had to clean the...

Challenger series diaphragm well tank [ 4 Answers ]

I've lived in this house for a little over a year now. We have a well, well pump, and using the challenger series diaphragm well tank. Tonight is the first night that I've noticed a sound the keeps coming on and then shutting off at the tank. I felt the hose coming from the tank going into the...

Ao smith aqua air v140 how to pressurize tank [ 1 Answers ]

I just let all the pressure out of my AO Smith aqua air v140 to patch a pin hole in the bottom of the tank, when I put air in he tank with a pressure switch of 40/50 how much air do I put back in the tank?

View more questions Search