Ask Experts Questions for FREE Help !
Ask
    tamshomeart's Avatar
    tamshomeart Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2014, 05:21 AM
    Inducer motor won't start York Diamond 80 furnace
    When I turn t.stat on heat, inducer motor will not come on. My husband is a do it yourselfer, but he need help trying to fix it.
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Aug 5, 2014, 09:33 AM
    I can't find the wiring diagram online. Can you post a close up pic of the diagram?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Aug 5, 2014, 04:12 PM
    Check the fuse on the control panel and make sure the thermostat has good batteries if so equipped.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York Diamond 90 furnace will not start [ 0 Answers ]

I have a York Diamond 90 updraft furnace in the basement and it stopped working this morning. I tried to troubleshoot the problem: 1. The DRAFT INDUCER MOTOR starts running but the furnace will not come on. 2. I see 3 flashes of the led on the control board which means that the pressure switch...

I have a York Diamond 80 (installed 2001) that won't start [ 1 Answers ]

I've replaced hot surface ignitor and pressure switch and no luck. If I remove tube from inducer and draw air from pressure switch, the ignitor begins to glow but not long enough for burners to start. Other times when I've tried this trick, the blower starts but burners do not. I checked the vent...

York Diamond 80 furnace won't shut off [ 0 Answers ]

This is the 2nd time our York Diamond 80 furnace won't shut off, even when the system is set to off. A faulty thermostat was replaced 6-8 months ago and all has been fine since then. How do we turn it off? I've killed the circuit breakers that are labeled for the heater/AC unit but the...

Inducer Motor on York Diamond 90 Keeps Running [ 4 Answers ]

I recently had the inducer motor replaced when it burnt out but I am having issues again. The inducer motor keeps running and won't stop until the whole system shuts down. Let me correct myself. I actually am reading about 26 V on the terminals of the pressure switch. The voltage on the...

York diamond 80 furnace won't stay lit [ 0 Answers ]

York Diamond 80 burners will not stay lit. They go out after 5 - 10 seconds.

View more questions Search